|
Woodstock W1044 4-to-2-1/2-Inch Reducer |  | Brand: Woodstock
Category: Home Improvement
List Price: $4.50
Buy New: $3.89
as of 9/7/2010 18:01 MDT details
You Save: $0.61 (14%)
New (5) from $3.89
Seller: Amazon.com
Rating:  13 reviews
Sales Rank: 1183
Media: Tools & Hardware
Shipping Weight (lbs): 0
Dimensions (in): 4.3 x 4.1 x 4.1
MPN: W1044
Model: W1044
UPC: 754001000445
EAN: 0754001000445
ASIN: B0000223YJ
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours
| |
| |
| Features:
| • | 2-1/2-Inch by 4-Inch outside diameter | | • | 4-1/2-Inch length by 4-1/4-Inch width by 4-1/4-Inch diameter |
|
| Accessories:
|
| Similar Items:
| |
| Editorial Reviews:
Product Description
Adapter for Shopvac and Sears®
|
| Customer Reviews:
Showing reviews 1-5 of 13
 Reducer Seducer May 24, 2010
Luap (The Cove at Cripple Creek)
0 out of 1 found this review helpful
Combined with a "plumbing-dept" rubber pipe connector, these work well for all my shop tools. The plumber connectors are the key as they are available for every standard size port you might need. They come as 2:2 or 2.5:2 or 2:3.0 etc. They use a clamp on each end so the ports are tight and right. Order several at once or you pay more for freight than the tool !!
 Disappointed with Amazon March 8, 2010
James W. Healy
0 out of 4 found this review helpful
This is the first time I have been disappointed with ordering from Amazon. The product itself was as described but I odered a dust hood and some clamps with it and found out AFTER THE ORDER WAS PLACED that the clamps came from a different vendor and therefore the order was not eligible for free shipping and then that the dust hood (the reason for the order) would not be shipped for a month. I have no use for the reducer withhout the hood but it was shipped promptly and the hood was not. I cancelled the clamp order and the hood order but the cost of returning the reducer was more than the cost of the reducer itself. If the delay were made known at the time of the order I would not have placed it and would not be wary of any future orders.
 Large end too small February 1, 2010
Peter Lopez
2 out of 4 found this review helpful
The dimensions given are not stated whether they are inside or outside, but I bought it anyway because it was not expensive. I found that the large end was the same as the fitting on my table saw so I have to fashion a sleeve to make it work. Having said that it fit my shop vac perfectly and it works fine.
 Make sure it will fit December 28, 2009
Gregg K. Sullivan (Santa Fe, NM)
1 out of 2 found this review helpful
I bought this when it came up as a suggestion by Amazon when I purchased a Grizzly jointer/planer. The 4" diameter is the same as the outlet for the jointer/planer so it would not fit my application. I joined them with duct tape, but the 4" hose sold by many retailers might work. The 2.5" end fit my shopvac perfectly. So the adapter works fine, but apparently not all manufacturers measure 4" in the same way. But was worth the price.
Dosen't Fit 2 1/2 fitting on my table top machines December 19, 2009
D. Fusari (USA)
1 out of 7 found this review helpful
Dosen't Fit 2 1/2 fitting on my table top machines. Isn't that the whole purpose? It is the same size as the machine ports. Will not fit over or in port, only flush. Bummer I bought 5 of them
Showing reviews 1-5 of 13
|
|
|
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME. Powered by Associate-O-Matic
| |
